Flavor Burst TS 44SS/BEV, Instruction Manual

Page: 87 / 112

86
4. Ensure the box next to ENABLED TIMED
SERVING SIZE is selected. Touch the box
to select it.
NOTE:
INJECTOR FLUSH AND DISPENSE
INSTRUCTIONS SCREEN ARE OPTIONAL
FEATURES WITHIN THE TIMED SERVING
SIZE MODE. HOWEVER, IF YOU ARE
TESTING THIS FEATURE FOR THE FIRST
TIME, SELECT ONLY THE “ENABLE
INJECTOR FLUSH” BOX TO PROCEED TO
THE NEXT SECTION.
NOTE:
“ENABLE AUTO DISPENSE MODE”
AND “ENABLE FCB PURGE” ARE FOR USE
WITH FROZEN CARBONATED BEVERAGE
SYSTEMS ONLY.
NOTE:
“ENABLE SELF SERVE MODE” IS
NOT FUNCTIONAL WITH THE TIMED
SERVING SIZE MODE.
5. Press the DONE key in the upper right
corner of the screen.
6. To use the timed serving size draw mode
for both freezers, repeat these instructions
for the other spout. The spouts can be set
for different draw modes; you may set the
standard manual draw mode on one, with
the timed serving size mode on the other.
7. To adjust the size for each individual size,
see the
“Setting Serving Size Timing”
section.
Dispensing Product
– Timed Serving Size
Draw Mode
With the timed serving size draw mode, the
flavors selected will automatically shut off after
the draw handle is open to dispense for a
preset time and a beep alerts the operator to
close the draw handle. This helps eliminate
carryover issues between servings. The timing
for each serving size can be adjusted as
instructed in the section
“Setting Serving Size
Timing.
”
1. Select a Spout, A or B.
2. Select the serving size key (Small, Medium,
Large, Extra Large). The system will default
to the Medium size if no other size is
selected.
NOTE: DESELECTING THE MEDIUM SIZE
(IE, NO SIZES ARE SELECTED), CAUSES
THE FLAVOR TO DISPENSE AS LONG AS
THE DRAW HANDLE IS OPEN, AND NO
BEEPING SOUND WILL ALERT THE
OPERATOR TO STOP THE SERVING. THIS
HAS THE SAME EFFECT AS THE
STANDARD MANUAL DRAW MODE.