Flavor Burst TS 44SS/BEV, Instruction Manual

Page: 42 / 112

41
21. Press the PRIME SYRUP PUMP key.
22. The system is now in the Prime Syrup
function mode.
NOTE: IF THE FLAVORS INSTALLED ARE
DIFFERENT THAN THE FLAVORS SHOWN
ON THE MENU, YOU WILL NEED TO
CHANGE THE TOUCHSCREEN MENU LABEL
FOR THAT SYRUP LINE. SEE THE
“TOUCHSCREEN OPERATIONS –
ASSIGNING FLAVORS TO THE MENU” FOR
INSTRUCTIONS.
23. To prime the syrup line, place a container
under the Injector / Blending Head spout.
Press the key of the first flavor and allow the
syrup to flow to flush out the sanitizer
solution and any air pockets.
24. Once syrup flows consistently from the
Injector / Blending Head, press the flavor
key again to complete the procedure.
25. Press DONE to exit the Prime Syrup Pump
mode and return to the main screen.
26. Repeat Steps 19-25 for each syrup line that
needs to be primed.
27. When all the syrup lines with replaced
flavors have been primed, press the
INJECTOR FLUSH key to clean the Injector
/ Blending Head.