Flavor Burst TS 44SS/BEV, Instruction Manual

Page: 93 / 112

92
Adjusting Flavor Dispense Rate
To produce the best serving, the output must be
adjusted to the proper level. Each flavor is
formulated to dispense at a standard level 5
which is, generally speaking, the recommended
flavor level. However, differences in freezers,
consumer preferences, and product mix and
dispense flow rate will determine what level is
appropriate for your operation. Fortunately, the
TS 44SS/BEV system is adjustable for both
flow and taste at any time.
1. From the main menu screen, press the
SETUP key in the upper left corner. Enter
the password if required.
2. Press SPOUT A MAINTENANCE (or
SPOUT B MAINTENANCE if adjusting the
dispense rate on a flavor that dispenses
from Spout B).
3. Press the ADJUST DISPENSE RATE key.
4. Use
the “<” and “>”keys to scroll through the
flavor list in the first box and find a flavor
that need to be adjusted.
5. Then, use
the “<” and “>”keys to increase or
decrease the flow rate in the second box. A
higher number increases the amount of
flavor per serving.
NOTE:
THE STANDARD SETTING IS ‘5’,
HOWEVER THIS SHOULD BE ADJUSTED IF
NEEDED ACCORDING TO PRODUCT FLOW
RATE, SYRUP FLAVOR STRENGTH AND
PERSONAL PREFERENCE.
6. Repeat Steps 4 and 5 to adjust the levels
for other flavors for this spout.
7. Press the DONE key to return to the main
screen.
8. Repeat these instructions to adjust the
dispense rate for the other spout.