89
7. Then assign the appropriate length of time
the “<” and “>”keys in the second box.
Assign timing for each size.
8. Repeat Steps 6 and 7 to set timing for the
other sizes.
9. Press the DONE key in the upper right
corner of the screen.
10. Test out each serving size and repeat
instructions to make any adjustments.
11. Repeat these instructions to adjust the
serving size timing for the other spout.
Adjusting the End of Serving Delay Timing
When the system is in the Timed Serving Size,
the syrup pump shuts off moments before the
serving size alarm beeps. This feature allows
unflavored product to pass through the Injector /
Blending Head and clears out the flavoring so
there is less carryover to the next serving.
Depending on your freezer’s product flow rate,
you may need more or less time between the
syrup shut-off and the serving size alarm. This
can be adjusted using the following directions.
1. From the main menu screen, press the
SETUP key in the upper left corner. Enter
the password if required.
2. Press the SPOUT A MAINTENANCE key
(or SPOUT B MAINTENANCE if you wish to
set timing for the freezer to the right).
3. Press the TIMING SETTINGS key.
Summary of Contents for TS 44SS/BEV
