Page 80
Vision Sensor SBSI/SBSC-EN, 8062650 - 1607b - 13/09/2016
Vision Sensor Manual
Auto
If “Auto” is selected the minimum cycle time is automatically adjusted in the way that
the LED-power is 100%
Fig. 65: Tab Job / Cycle time
4.6.2 Alignment
Alignment compensation can be necessary for objects or characteristics whose position varies in the
image. Three different detection methods (alignment detectors) are available for this purpose.
Next topic:
Selection and configuration of an alignment detector (Page 81)
Mode of function of an alignment detector
An alignment detector is a tracking coordinate system, which is anchored to one selected characteristic.
All subsequently defined detectors are aligned in relation to this coordinate system. Maximum one
alignment detector can be defined for each job.
For information to the meaning and adjustment of the different frames see chap.
As alignment requires an extra calculation step, it should only be used if required by the application.
Application example:
Alignment of an entire part using two edge detectors, i.e. here the top left-hand corner of the part is
detected. Now contrast detectors can find and check features in relation to the position of the part.
Summary of Contents for SBSC-EN
Page 1: ......
