Page 284
Vision Sensor SBSI/SBSC-EN, 8062650 - 1607b - 13/09/2016
Vision Sensor Manual
5.7.2.1 Settings in Vision Sensor Device Manager
Fig. 295: Vision Sensor is displayed and selected in Vision Sensor Device Manager.
When Vision Sensor Device Manager launches or by clicking the “Find” button, all active Vision sensors
are listed in the upper window called “Active sensors”. You can change the IP address, subnet mask and
other parameters on the Vision sensor by clicking the “Set” button. This displays the following dialog box.
5.7.2.2 Setting of IP and name
Fig. 296: Setting of IP and name
5.7.2.3 Open Vision Sensor Configuration Studio
With click to “Config” in Vision Sensor Device Manager, and to “OK” in the following dialog Vision
Sensor Configuration Studio starts. With the desired Vision sensor is selected in Vision Sensor Device
Manager, click “Config.” When the following dialog box is displayed, click “OK” to stop the Vision sensor
and begin configuring it.
Summary of Contents for SBSC-EN
Page 1: ......
