Vision Sensor SBSI/SBSC-EN, 8062650 - 1607b - 13/09/2016
Page 203
Vision Sensor Manual
You can control the selection and reproduction of stored images using the "<" (back), Start / Stop and ">"
(next) buttons as well as the slide bar underneath the display window. The image counter indicates the
number of the current image as well as the number of images in the active filmstrip.
4.6.7.4.4.2 Image section and enlargement:
Fig. 203: Zoom
You can select the required image section using the buttons or drop-down menu under the display
window
4.6.7.4.4.3 Graphical display of results
You can active or deactivate the following graphics in the View menu:
l
Bar graph result: Displays the inspection result as a bar graph
l
Drawings: Displays search, parameter and position frames detectors and alignment detectors
l
Focussing aid: Displays image sharpness (see also Job settings)
l
Enlarged display: Insertion of a separate enlarged display window, which can be adapted to the
required scale using the adjustment handles at the corners of the frame
The module Vision Sensor Visualisation Studio offers a limited selection of these functions.
4.6.7.5 Image recorder
An image recorder is available in the Vision Sensor Configuration Studio and Vision Sensor Visualisation
Studio programmes. When the recorder is activated, either all images or just error images are
continuously loaded into the internal memory. This covers 10 images, the oldest images are in turn
replaced (FIFO buffer). The recorded images can then be called-up and displayed with a PC, or stored on a
PC or on an external storage medium, and are then available for analysis or simulation purposes in offline
mode.
In the Vision Sensor Visualisation Studio program, you may be required to enter a password (if activated)
to call up recorder images (User user group, see user administration).
Activating recorder:
Activate the recording function in the job settings in the Vision Sensor Configuration Studio programme
(tab Image transmission). You can select whether all images or only error images are to be recorded in
the pop-up list of Recorder parameters.
Selecting and recording images:
Select “Get images from sensor” from the File menu or click on the button "Rec.images" (only in Vision
Sensor Visualisation Studio).
A display window appears in which you can load images stored in the sensor's RAM on to the PC and then
examine and save them:
Summary of Contents for SBSC-EN
Page 1: ......
