FEC AFC3000, Hardware Operation Manual

Page: 218 / 294

Chapter 8 System Operation
PAGE 8- 11
Fastening Result Display Mode example
「 「 「 「
D-No
. . . .
」 」 」 」 「 「 「 「
DATA
」 」 」 」
Peak Torque
Final Angle
Rate 1
Tool Cycle Count (x1)
■ ■ ■ ■
Rate 1 (Low)
■ ■ ■ ■
1st NG Item (300=Rate 1)
■ ■ ■ ■
Rate 1/2/3 Judgment (Rate 1 low)
■ ■ ■ ■
No. of Fastening Steps
■
■ ■
■
Fastening Method (Torque)
■ ■ ■ ■
Reverse Flag
････
The displayed contents of the following D-Nos. are not stored in the fastening
result retention (in the controller)
D-No. 12 “Fastening Method,” D-No. 13 “Number of Fastening Steps,”
D-No. 14 “Self-Checking Flag,” D-No. 15 “Reverse Flag,” and
D-No. 16 “Servo Lock Flag.”
～
[ ▲ ] or [ ▼ ] push-button
(Skip 5 numbers while holding down)
000
001
002
035