OMNI-408A Installation and Setup Guide
9–14
CS TEST TIME INTERVAL - There are 2 modes of test transmission for the CS Test Time
Interval. One mode is reset by an event and the other mode operates only by time, as
described below. Enter the CS code in question 21, locations 3 and 4.
CS TEST BY EVENT - If this feature is enabled, the system transmits the Test code to the
central station at the interval selected, in the absence of any other signal. Select from daily
(24-hour), weekly, 27 days, 60 days, or 90 days. Transmission of any signal resets the CS
Test clock. For example, if a business opens and closes 6 days a week, then a test signal is
generated at the interval selected after the last closing signal.
CS TEST BY TIME - If this feature is enabled, the system transmits the Test code to the
central station at the interval selected. Select from daily (24-hour), weekly, 27 days, 60 days,
or 90 days. For example, if a 24-hour CS Test is selected, the CS Test signal is sent to the
central station every 24 hours.
UL
The CS Test Time Interval feature must be selected for UL installations.
Question 07, L4
RF Trouble Sounder, AC Loss Sounder & Euro. Ring Detect
Default = 6
Digit
RF PROGRAM
USING BYPASS KEY
RF TROUBLE
SOUNDER
AC LOSS
SOUNDER
EUROPEAN
RING DETECT
0
NONE
1
9
2
9
3
9
9
4
9
5
9
9
6
9
9
7
9
9
9
8
9
9
9
9
A
9
9
B
9
9
9
C
9
9
D
9
9
9
E
9
9
9
F
9
9
9
9
RF PROGRAMMING ACCESS USING THE BYPASS KEY - Allows the installer to select
the procedure for accessing the RF program questions in Installer programming mode. If the
bit is NOT enabled, the procedure for RF programming requires pressing the [*] key followed
by the [#] key followed by the 2-digit RF question number to access the RF questions. If the
bit IS enabled, the procedure now is to press the [Bypass] key followed by the 2-digit RF
question number.
Summary of Contents for Omni-408A
