FBII Omni-408A, Installation And Setup Gude, Page: 42 / 96

OMNI-408A Installation and Setup Guide
9–8
AUTO STAY - If enabled, the system is always armed in the STAY mode with all interior
zones enabled with the Stay option bypassed. The Stay zones become armed only if someone
exits through a delay zone during the exit delay period.
POOL ZONE - If enabled, activates the Pool Zone (zone 4) when the system is disarmed.
When the system is armed, zone 4 acts like a normal delay zone and depressing one of the
Pool Zone momentary switches starts the entry delay time.
Question 05 L3
Quick Commands & Quick Exit
Default = E
Enter the digit from the table below in location L2.
NOTE: The checkmarks highlight which options are selected.
QUICK COMMANDS
Digit
QUICK FORCED
ARMING
QUICK
ARMING
QUICK
BYPASS
QUICK
EXIT
0
1
9
2
9
3
9 9
4
9
5
9 9
6
9 9
7
9 9 9
8
9
9
9 9
A
9 9
B
9 9 9
C
9 9
D
9 9 9
E
9 9 9
F
9 9 9 9
QUICK FORCED ARMING - Specifies whether Quick Forced Arming ([#] [2]) is permitted.
If chosen, Quick Forced Arming arms the system bypassing any faulted zones.
Openings/Closings report User no. 8 to the CS if enabled.
UL
For UL installations, do not select Quick Forced Arming.
QUICK ARMING - Specifies whether Quick Arming ([#] [1]) is permitted. If chosen, Quick
Arming arms the system ONLY if the system is READY. Openings/Closings report User no. 8
to the CS if enabled.
QUICK BYPASS - Specifies whether bypassing a zone without a user code is permitted.
QUICK EXIT - If enabled, this feature allows the user to exit without having to disarm,
then arm, the system. It is activated by pressing the [Stay] key while the system is armed
and not in entry delay. This starts exit time, causes the keypad to beep once, and allows the