![background image](http://html1.mh-extra.com/html/fbii/omni-408a/omni-408a_installation-and-setup-gude_547064043.webp)
Section 9 - System Programming
9–9
user to exit without disarming the system. The system returns to its last armed state after
exit time has expired.
Question 05, L4
Rest. Foll. Loop, User On-line, Bell Test from RF Keyfobs, & User 5 Arm
Default = 5
Enter the digit from the table below in location L4.
NOTE: The checkmarks highlight which options are selected.
Digit
RESTORE
AFTER BELL
RESTORE
FOLLOWS
LOOP
USER
ON-LINE
BELL TEST
FROM RF
KEYFOBS
USER 5
ARMS
ONLY
0
9
1
9
2
9
9
3
9
9
4
9
9
5
9
9
6
9
9
9
7
9
9
9
8
9
9
9
9
9
A
9
9
9
B
9
9
9
C
9
9
9
D
9
9
9
E
9
9
9
9
F
9
9
9
9
RESTORE AFTER BELL - Restores are transmitted after the loop has returned to normal
after bell cutoff, or upon system disarming, regardless of the loop status.
RESTORE FOLLOWS LOOP - Restores are transmitted immediately upon zone restoral
while the system is armed, or upon system disarm, regardless of the loop status.
USER ON-LINE & CHIME TOGGLE ENABLE - Enables the end user command ([#] [9])
for the on-line download. This command instructs an end user on how to initiate an on-line
download, possibly preventing a service call. This option also enables the user chime toggle
([#] [6]).
BELL TEST FROM RF KEYFOBS - When set, bell test on arming/disarming (refer to
question 8, location 1) activates only from keyfobs. Arming/disarming from the keypad via
user codes or quick function does not trip bell test.
Audible ringback automatically occurs on all alarms except silent alarms, regardless of the setting
of this option.
USER 5 ARMS ONLY - If selected, then User 5 is used as an ARM-only code (Maid code); it
does not disarm the system.
Summary of Contents for Omni-408A
