![background image](http://html1.mh-extra.com/html/fbii/omni-408a/omni-408a_installation-and-setup-gude_547064027.webp)
Section 6 - System Operations
6–5
For example, the 24-Hr Keypad Panic can be initiated by pressing both keypad Panic keys at
the same time. The panic condition can be silent (no bell output) or audible, based on the
programming option.
NOTE: The default value for Panic is audible.
Audible Panic, Fire and Audible Auxiliary can be RESET BY ENTERING ANY VALID
USER CODE or using the asterisk [*] key.
Pager Follow Me Displays
The display shown on your pager will be "ACCTEXXX":
Where
"ACCT" is the 4-digit central station #2 account number.
"E" is the event code. There are 4 event types: alarms, troubles, openings, and closings. These
event codes are as follows:
Openings = 0, Closings = 1, Alarm or Trouble = 9
If multiple events occur, the highest event takes priority. Events from highest to lowest priority
are alarms, trouble, open, and close.
"XXX" is, depending on the event, either the zone (01-08) or user (1-14) designations.
USER DESIGNATION
FUNCTION
1-6
User codes
7
Remote arm/disarm
8
Quick Arm #1, Quick Forced Arm #2
9-14
Keyfobs
Entering Pager Follow-Me Phone Numbers
To enter pager follow-me phone number: press [#] [5] [8] [Code] (optional), Pager #, [#]
Where:
[#] [5] [8] — Accesses end user pager number programming (acknowledge tone should be
emitted).
[Code] — Optional command that if pressed will insert a "C" or 2 second pause.
Pager # — Including the [Code] key, allows for 16 digits for the pager phone number.
[#] — Pressed after entering changes, will save new pager number, null out remaining
locations, and exit pager-programming mode. An acknowledge tone should be emitted.
[*] — Exits #58 mode without saving changes. An acknowledge tone should be emitted.
NOTE: If no key is pressed for 10 seconds, the mode times out and exits automatically
without saving changes.
Summary of Contents for Omni-408A
