![background image](http://html1.mh-extra.com/html/fbii/omni-408a/omni-408a_installation-and-setup-gude_547064017.webp)
4–1
S E C T I O N 4
Keypad Mounting
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
♦
Mounting the XK-108 Keypad
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
How to Mount the XK-108 Keypad
The XK-108 Keypad may be surface-mounted in any of the following three ways:
•
Directly to a control panel enclosure if it has a keypad cutout on the front.
•
Directly to a single- or double-gang electrical junction box.
•
Directly to a wall or other surface.
Removing the Keypad Cover Assembly
Remove the keypad cover assembly from the rear mounting plate by inserting a small
screwdriver blade in the COVER PRY-OFF SLOTS at the lower edge of the keypad (see
Figure 3) and twist to pry off the cover assembly.
COVER
REAR PLATE
BREAK-AWAY RIBS (4)
(FOR EXPOSED WIRING ENTRY.)
SLOT FOR COVER SECURING SCREW
(OPTIONAL)
COVER PRY-OFF SLOTS (2)
(TO REMOVE COVER, INSERT SMALL
SCREWDRIVER BLADE AND TWIST.)
DOOR
Figure 3. Bottom View of Keypad
Mounting the Rear Plate
Mount the rear plate as shown in Figure 4. Note that the plate is correctly oriented when its
part number, molded into the plastic, is upright.
A
A
B
A
A
B
N6054
HOLDING HOOKS (2)
(FOR HOLDING COVERS UPPER EDGE)
HOLES “A” (4)
(FOR MOUNTING TO
CONTROL PANEL’S
ENCLOSURE OR
TWO GANG
ELECTRICAL BOX)
HOLES “B” (2)
(FOR MOUNTING TO
SINGLE GANG
ELECTRICAL BOX)
HOLES “A” OR “B”
(CAN BE USED
FOR WALL MOUNTING)
SNAP HOOKS (2)
(FOR HOLDING COVER’S
LOWER EDGE)
BREAK-AWAY RIBS (4)
(FOR EXPOSED WIRING ENTRY.)
POST FOR COVER
SECURING SCREW
(OPTIONAL)
WIRING
OPENING
(FOR
CONCEALED
WIRING)
Figure 4. Rear Mounting Plate
Summary of Contents for Omni-408A
