![background image](http://html1.mh-extra.com/html/fbii/omni-408a/omni-408a_installation-and-setup-gude_547064071.webp)
11–1
S E C T I O N 1 1
Data Entry via LED Based Keypads
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
♦
General Information
♦
Entering Programming Mode via Keypad
♦
What You See on the LED Keypad
♦
Entering Data
♦
Summary of System Programming
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
General Information
This section describes the physical keystrokes necessary to perform keypad programming,
and tells how to interpret the data displayed on LED-based keypads during programming
operations.
NOTE: Actual keypad programming should be performed after completion of the
programming sheet.
Entering Programming Mode via Keypad
The System Programming mode can be entered ONLY WHILE DISARMED, as follows:
To enter Installer Programming: Press [Code] [*] 4-digit Installer code (default 2468) [1]
What You See on the LED Keypad
Program Mode = READY LED Pulsing
As soon as you enter the Installer Keypad Programming mode, the READY LED slowly
pulses, and continues to pulse until you leave this mode. The remaining LEDs display the
question number and location contents as indicated below:
ARM
AC/LB
READY
1
2
3
4
5
6
7
8
STAY
INST
COVER
OPEN
Stay
Instant
Bypass
Code
*
0
#
7
8
9
4
5
6
1
2
3
P
A
F
+1
+2
+4
+8
+16
TX LB
RF. SPVR
+1
+2
+4
+8
Question Number
Data
Figure 7. Keypad Programming
Summary of Contents for Omni-408A
