Section 9 - System Programming
9–23
QUESTION 13
ZONE 3 TYPE & CS CODE
DEFAULT = 1033
Question 13, L1 & L2 - Zone 3 Type
Default = 10
Question 13, L3 & L4 - CS Code for Zone 3
Default = 33
Zone 3 = Instant (Perimeter) w/CS Reporting code = 33
NOTE: If zones 1 - 3 are programmed as DELAY zones, they follow ENTRY DELAY
1. If zones 4 - 8 are programmed as DELAY zones, they follow ENTRY DELAY 2.
QUESTION 14
ZONE 4 TYPE & CS CODE
DEFAULT = 1034
Question 14, L1 & L2 - Zone 4 Type
Default = 10
Question 14, L3 & L4 - CS Code for Zone 4
Default = 34
Zone 4 = Instant (Perimeter) w/CS Reporting code = 34
QUESTION 15
ZONE 5 TYPE & CS CODE
DEFAULT = 1035
Question 15, L1 & L2 - Zone 5 Type
Default = 10
Question 15, L3 & L4 - CS Code for Zone 5
Default = 35
Zone 5 = Instant (Perimeter) w/CS Reporting code = 35
QUESTION 16
ZONE 6 TYPE & CS CODE
DEFAULT = 1036
Question 16, L1 & L2 - Zone 6 Type
Default = 10
Question 16, L3 & L4 - CS Code for Zone 6
Default = 36
Zone 6 = Instant (Perimeter) w/CS Reporting code = 36
QUESTION 17
ZONE 7 TYPE & CS CODE
DEFAULT = 1037
Question 17, L1 & L2 - Zone 7 Type
Default = 10
Question 17, L3 & L4 - CS Code for Zone 7
Default = 37
Zone 7 = Instant (Perimeter) w/CS Reporting code = 37
QUESTION 18
ZONE 8 TYPE & CS CODE
DEFAULT = 1038
Question 18, L1 & L2 - Zone 8 Type
Default = 10
Question 18, L3 & L4 - CS Code for Zone 8
Default = 38
Zone 8 = Instant (Perimeter) w/CS Reporting code = 38
QUESTION 19
CS CODES for AMBUSH and AC LOSS
DEFAULT = AABA
There are 4 locations (L1-L4) in this question as follows:
Question 19, L1 & L2 - Ambush Code
Default = AA
If an Ambush code is defined, User no. 6 is the Ambush code. The same rules apply here
regarding dialer format. If transmission is not desired, program AA in locations L1 and
L2.
NOTE: Ambush transmissions are immediate and not abortable.
Summary of Contents for Omni-408A
