![background image](http://html1.mh-extra.com/html/fbii/omni-408a/omni-408a_installation-and-setup-gude_547064072.webp)
OMNI-408A Installation and Setup Guide
11–2
Question Numbers = Zone LEDs
Zone LEDs 1 through 5 display the current question number (not the specific location within
each question). In Figure 7, the question number is the total you get when you add the
values of all LEDs that are lit.
Examples:
Zone 1 lit, Zones 2-5 off = question 01
Zone 1 lit, Zone 2 lit, Zones 3-5 off = question 03
Zone 2 lit, Zone 3 lit, Zone 4 lit, Zones 1 and 5 off = question 14
Location Contents = System Status LEDs
The remaining status LEDs (STAY, INST, TX LB and RF SPRV) display data that resides in
each location within the current question. As shown in the diagram above, the value located
next to each LED that is lit must be added to calculate the total data for each location.
Examples:
Stay lit, Inst, TX LB and RF Sprv off = 1
Stay and Inst lit, TX LB and RF Sprv off = 3
Inst and RF Sprv lit, Stay and TX LB off = A
The following chart shows binary values that you will see on these LEDs for the letters A-F
that may be entered in some locations of the program sheet.
Digit
Binary Value
Description
A
10
Inst and RF Sprv lit
B
11
Stay, Inst, and RF Sprv lit
C
12
TX LB, and RF Sprv lit
D
13
Stay, TX LB, and RF Sprv lit
E
14
Inst, TX LB and RF Sprv lit
F
15
Stay, Inst, TX LB, and RF Sprv lit
Entering Data
This section of the guide describes the physical keystrokes to enter the data written on the
program sheet.
Movement Between Questions
System Program mode starts with question 1 displayed. Direct jumps to any question can be
made by pressing the [*} key and the 2-digit question number.
Questions can be accessed directly or sequentially.
Example: To jump to question 07, Press [*] [0] [7]
The zone LEDs display the question number. The status LEDs display the contents of the
first location in that question.
Summary of Contents for Omni-408A
