background image

 

1

 

INDOOR SPIRAL COLOR DOME CAMERA 

WITH IR ILLUMINATORS        

OPERATING INSTRUCTIONS 

 

 

 

CAUTION 

 

RISK OF ELECTRIC 

SHOCK DO NOT OPEN 

 

 

CAUTION: TO REDUCE THE RISK OF 
ELECTRIC SHOCK, DO NOT REMOVE COVER 
(OR BACK). NO USER-SERVICEABLE PARTS 
INSIDE, REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL. 

 

 

The lightning flash with arrowhead 
symbol, within an equilateral triangle, 
is intended to alert the user to the 
presence of un-insulated “dangerous 
voltage” within the product’s 
enclosure that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons. 

 
NOTE: This equipment has been tested and found to 
comply with the limits for a Class B digital device, 
pursuant to CE regulations. These limits are designed to 
provide reasonable protection against harmful interference 
when the equipment is operated in a commercial 
environment. The equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, may cause 
harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to 
cause harmful interference in which case the user will be 
required to correct the interference at his own expense. 
 
CE Caution: To assure continued compliance, (example – 
use only shielded interface cables when connecting to 
computer or peripheral devices), any changes or 
modifications not expressly approved by the party 
responsible for compliance could void the user’s authority 
to operate this equipment.  

 

 

 

 

 

The exclamation point within an 
equilateral triangle is intended to alert 
the user to the presence of important 
operating and maintenance (servicing) 
instructions in the literature 
accompanying the appliance. 

The serial number of this product may be found on the 
bottom of the unit. 
You should note the serial number of this unit in the space 
provided and retain this instruction as a permanent record 
of your purchase to aid identification in the event of repair. 
 
Model No.                                                              
 
Serial No.   

MODEL: 

 TFD-S36FI12IR

 

WARNING

: To prevent fire or electric shock hazard, do not expose this appliance to rain 

                      or moisture. 
                     The apparatus shall not be exposed to dripping or splashing and that no 
                      objects filled with liquids, such as vases, shall be placed on the apparatus. 
 

Summary of Contents for TFD-S36FI12IR






Reviews: