FAW Jilin Automobile Xenia S80 Handbook Download Page 183

Page: 183 / 262

11-9



It is advisable to block off the wheels with
scotches, and no people shall be allowed to stay
inside the jacked automobile.



No one is allowed to place his body beneath the
jacked-up automobile; please use automobile
supports.



Never put any positions of your body beneath
the jacked-up automobile.



The lifting jack delivered with your automobile
is for wheel-changing only.



Never use it to lift up other vehicle or to support
heavy objects.



Put the lifting jack at a specified jacking point.



Do not shake or push a jacked-up automobile.



Do not run the engine when an automobile is

jacked up.



Carry away heavy baggage from the automobile

in so far as possible.

4. (front)

To use the jack handle, do conduct assembling as

shown in the figure above.

Back

Jack handle

Hub wrench

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands