FAW Jilin Automobile Xenia S80 Handbook Download Page 145

Page: 145 / 262

8-1

Exterior rearview mirrors

Danger



Prior to driving, do return the exterior rearview

mirrors to their original positions. Never drive

your automobile with the exterior rearview

mirrors folded.



Do not regulate the rearview mirrors during

driving so as not to lose control of your

automobile.

Warning

Be careful not to scrape the rearview mirrors when

you remove the ice and snow cover.

Manual regulation of rearview mirrors

Regulate the rearview mirrors such that the sides of

your automobile may be just seen in the rearview

mirrors.

Regulate rearview mirrors by
rearview mirror switch

When  ignition  switch  is  set  to  “ACC”  or  “ON  ”
position,  the  rearview  mirror  switches  may  be
operated.
1.

Set the main switch leftwards or rightwards as
required.

Push  the  control  switch,  and  regulate  the
rearview  mirrors  such  that  the  sides  of  your
automobile  may  be  just  seen  in  the  rearview
mirrors.

The main switch shall be returned to the
central (OFF) position when it is not used.

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands