FAW Jilin Automobile Xenia S80 Handbook Download Page 239

Page: 239 / 262

14-27

2. Push and turn anticlockwise the bulb, and

remove it.

Brake warning
light & taillight

Brake light

Taillight

Rear turn
signal light

Rear turn signal light

Taillight

Reversing light
or rear foglight

Backup light

Rear foglight

3. (Except for the taillights)

Push and turn anticlockwise the bulb, and

remove it.

(Taillight)

Pull outward the bulb, and remove it from the

receptacle.

Attention

To install the rear combination light assembly, do

verify that the projecting part of rear combination

light is already aligned to the holes in the car body.

License light

1. Remove the back door ornament.

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands