FAW Jilin Automobile Xenia S80, Handbook

Page: 131 / 262

7-29
Operating procedures of radio
Tuning
● Push the AM/FM button to select a waveband.
● When FM stereo broadcast is received, the radio
may automatically change over to the stereo
mode.
● If stereo broadcast is deteriorated due to static
interference, the radio may automatically
change over to the monophonic reception mode.
● Stations may be selected in 3 ways:
①
Manual tuning
Push gently the tuning button to set the frequency to
the desired one. Every time the button is pushed,
the frequency may be changed step by step.
●
Side … higher frequency
●
Side … lower frequency
The frequency being received is shown in the
display screen.
②
Search tuning
Tuning button
Push and hold the tuning button for 1 second or
more.
Radio search radio stations from the current
frequency to higher frequencies or lower
frequencies. When a station is received, search
tuning is automatically stopped.
●
Side … higher frequency
●
Side … lower frequency
Push the button once again to stop automatic tuning
midway
The frequency being received is shown in the
display screen
Attention
When you push and hold the button, the
frequency may increase (or decrease)
consecutively.
Scan button
1. Push the scan button, and receivable stations
may be received every other 5 seconds
approximately.
2. If the desired station is received, push the button
once more.
The frequency being received is shown in the
display screen.
③
Preset tuning
● Push the preset station selection button to call
out the preset stations.
● Push the selected scan button for 1 second or
more, only the radio stations memorized by the
preset buttons may be received in progression
every other 5 seconds. If the desired station is
received, push the button once more.
The frequency being received and channel number
are shown in the display screen.
How to preset radio stations
● Six (6) AM stations may be preset.
● For FM waveband, up to 6 stations may be
preset for FM1 and FM2 each, totaling 12
stations.
1. Push the AM/FM button to select a waveband.
2. Push gently the tuning button to set the
frequency to the desired one.
3. Push and hold the desired preset station
selection button for 2 seconds or more to store
the desired frequency, and a “Beep” sound may
be given when storage occurs.