FAW Jilin Automobile Xenia S80 Handbook Download Page 80

Page: 80 / 262

5-4

Battery charge warning light

If the charge system develops a fault when the

engine is running, the warning light goes on. Shut

down the attachments and engine.

Check the driving belt for slackness or fracture.

Danger

To check or regulate the driving belt, do shut down

the engine and wait till it gets cool; otherwise the

human body may be grievously injured.

Warning

If driving belt shows fracture or slackness, do not

continue driving your automobile; otherwise engine

overheat may be caused.

Contact the local special service store immediately

for inspection of the system.

Malfunction indicating light (MIL)

If the electronic control system develops a fault

when the engine is running, the MIL goes on.

Warning

If MIL goes on, contact immediately the local

special service store for inspection of your

automobile.

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands