FAW Jilin Automobile Xenia S80, Handbook

Page: 67 / 262

4-3
High beam
Headlight flasher
Turn on/off high beam
When the headlights are turned on, push outward
the lever to turn on the high beam, or pull it back to
return to lower beam. When high beam headlights
are turned on, the indicator light goes on.
Allow the headlights to flicker
Pull the lever gently and then release it.
The headlight flasher may work when the
headlights are turned on/off.
Turn signal light control
Change
a lane
When the ignition switch is set to its “ON” position,
the turn signal lights flicker.
Toggle the combination switch to indicate steering.
Here, indicator lights on the dashboard may start
flickering.
Or toggle gently the combination switch and keep
in any position (either upper or lower) to indicates
lane changing.
Attention
If the flickering rate is higher than that in normal
condition, bulb of the indicator light may be
damaged.
Emergency warning signal switch
Push the switch to allow all turn signal lights to
flicker.
Here, indicator lights on the dashboard may start
flickering.
Push it once again to turn off the switch.
The direction indicator switch does not work when
the emergency warning signal switch is turned on.
Do not operate the switch except for emergency.
Danger
Drive your automobile away from the lane to avoid
accident if any emergency occurs.