FAW Jilin Automobile Xenia S80 Handbook Download Page 62

Page: 62 / 262

3-28

Air bag computer

Air bag computer

The device is used to control the SRS air bags.

Warning

● In any case, the air bag computer must not be

removed or disassembled. Failure to observe the

warning particulars may lead to incorrect

triggering off of air bags or failure of

triggering-off in contingency situations.

● Be careful not to splash water, fruit juice or

similar materials onto the air bag computer.

● Never violently knock or kick at the air bag

computer or its peripheral positions.

● Triggered-off SRS air bags cannot be reused.

The computer must be replaced with new one at

the local special service store.

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands