FAW Jilin Automobile Xenia S80 Handbook Download Page 243

Page: 243 / 262

14-31

Instructions for the tires

• Tire size and structure of tires selected for

replacement must be identical with those of the
original tires, and the loading capacity shall be
idential or higher.

• Only specified hubs may be adopted.
• Since the first-life tire has not yet reach the

maximum cohesive force, the first 160km shall
be finished at moderate speed.

• When tubeless tire is replaced, the valve stem

must be replaced.

• Always put on the dust cup of tire valve.
• Contact the local special service store for

inspection of the uneven wear or damage of/to
the tires.

Danger

• Do not equipped your automobile with palmed

tires  of  different  types,  dimensions  and
manufacturers  because  that  may  lead  to  out  of
control of your automobile.

• If you have to drive on the road shoulders, kettle

holes or other obstacles, do drive your
automobile at low speed to avoid out of control
of your automobile.

• Do not drive your automobile when tires are

damaged. Because the tires may outbursts. In
addition, avoid using damaged rims.

• For tires with specified interchanging directions,

take care to follow relevant instructions given
by the tire manufacturer.

Warning

Be careful not to damage the tires due to scratch or

oiling.

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands