FAW Jilin Automobile Xenia S80 Handbook Download Page 54

Page: 54 / 262

3-20

Danger

● The seat belts must be fastened. SRS air bag is

an auxiliary apparatus and cannot serve as a

substitute for seat belt in any case. If each seat

belt is not correctly buckled up, the possibility

or grievous injury or death may still get higher

in case an accident happens even if your

automobile is equipped with SRS air bags.

● The seat cushions and backrests must be

regulated to their optimum positions. Failure

to regulate the seats to their optimum positions

may lead to dangers since the effect SRS air

bags may be affected, and the passengers may

be seriously injured in case collision takes

place.

● Do seat your body into your seat correctly and

completely, such that the distance from the

steering wheel to your body and the distance

from the dashboard to the front-row passenger

may not get too short. Furthermore, do not rely

on a position adjacent to the front door. If the

danger precautions are not observed, the

passengers may be subjected to serious injuries

or even death in case front side collision takes

place even if your automobile is equipped with

SRS air bags.

● Do not remove the steering wheel, dashboard or

relevant parts and components, and do not apply

excessively high forces onto these positions.

Failure to observe the danger precautions may

lead to invalidation of SRS air bags.

● Never modify or disassemble the SRS air bags.
● Do not touch the air charging system of SRS air

bags within 30 minutes after the air bags are

inflated. The air charging system of SRS air

bags may get extremely hot, and you may be

severely scalded if you touch the said position.

● Do not seat your body at the edge of a seat. Do

not lean over the dashboard, do not allow a

child to stand in front of a SRS air bag, and do

not carry a child by seating it on your knees.

The SRS air bag for front-row passenger may be

triggered off immediately inward the car

compartment; therefore, the strong impact force

generated by inflation of SRS air bags may give

rise to potential risk of serious injuries of the

passengers.

● Seat the child into the second-row seat, and do

buckle up its seat belt.

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands