FAW Jilin Automobile Xenia S80 Handbook Download Page 69

Page: 69 / 262

4-5

Demister switch, rear window

The rear window demister may be operated when

the ignition switch is set to the “ON” position .

Push the demister switch to demist the rear window.

When the demister is turned on, the indicator light

goes on.

The demister is not designed for snow melting or

rainwater drying.

When the combination switch is set to segment 1or

segment 2, the sign of demister may go on.

Warning



To avoid battery discharge, turn off the demister

once the window glass gets clear.



Never scrape the heating wire at any time.

Foglight switch

Front foglight

When the combination switch is set to segment 1 or

segment 2 and the front foglight switch is set to the
“ON” position, the front foglights go on.

When the front foglights are turned on, the indicator

light goes on.

Attention

If the combination switch is set to the “OFF”

position when the front foglights go on, the front

foglights may go out.

Indicator light

Front foglight switch

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands