FAW Jilin Automobile Xenia S80 Handbook Download Page 46

Page: 46 / 262

3-12

Danger

● Do not use an infant hand-basket or infant seat

on the front seat; Otherwise grievous injury or

even death may be caused in case an accident

takes place. When an accident happens, the

impulse force generated by quick inflation of air

bags for front-row passengers may grievously

injure or even kill the child.

● When the child protection devices are mounted,

verify that it may safely bind the passengers;

Otherwise, the children may be grievously

injured or even killed in case emergency

braking or an accident happens.

When the child protection device is not used, it

must be fixed by seat belt or put into a place other

than the passenger compartment. Doing so may

protect the passengers from being injured in case

emergency braking or an accident happens.

Types of child protection seats

(1) Infant seat

(

2) Child seat

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands