FAW Jilin Automobile Xenia S80 Handbook Download Page 185

Page: 185 / 262

11-11



Prior to installation of the spare tire, use waste

cloth to remove the erosion and foreign

materials occurring on the surfaces of brake

drum, brake disc and hub nuts.

If the metal fitting surfaces are note tightly

fitted during wheel installation, hub nut

looseness and traffic vibration may occur during

driving.

7. Reinstall all hub nuts, and tighten them up till

the wheel is tightened up.

Ensure that the conic sections of hub nuts are

securely mounting inside the holes.

Do not tighten them up forcibly first.

Warning

Do not oil the hub nuts. The hub nuts may get loose

during driving.

8. Insert the jack handle into the worm spindle of

lifting jack and turn it anticlockwise to lower

your automobile.

Cone-shape

position

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands