FAW Jilin Automobile Xenia S80, Handbook

Page: 68 / 262

4-4
Wiper and washer switch
Danger

To operate the wipers in frigid weather, use a
defroster or demister to heat up the heating-up
so as to prevent the cleaning fluid from icing up
and obstructing the vision.

Abraded or dirty wiper blades may impact your
vision. Do maintain and replace the wiper
blades when necessary.
Warning

The washing solution reservoir may be charged
up with cleaning solution only.

When there is snow cover, icing occurs on the
window glass or the window glass is dry, do not
use the wipers; otherwise the wiper blades may
be damaged.

If there is no cleaning solution inside the
reservoir, do not operate the wipers; Otherwise
the motors may be damaged.
Windshield wiper and washer switch
When the ignition switch is set to the “ON”
position, the wipers and washer may be operated.
Push the wiper switch drawbar down to the bottom
to turn on the wiper.
When the wiper switch is set to its “INT” position,
the wiper works in intermittent operation mode.
When the wiper switch is pushed up to the “MIST”
position from the “OFF” position, the wiper may
work at low speed. When you release the drawbar,
the wiper switch returns to the “OFF” position.
Pull the drawbar to the operator to activate the
washer.
Here the wipers and washer are linked up and work
at low speed.
Rear wiper and scrubber switch
When the ignition switch is set to the “ON”
position, the rear wipers and washer may be
operated. When the knob is set to the “ON”
position, the rear wiper works.
To spray cleaning solution while the rear wiper
works, turn the knob from the “ON” position to the
uppermost “
① ” position. Moreover, when the knob
is set to the lower “ ② ” position from the “OFF”
position, cleaning solution may be sprayed.
Scrubber
Low speed
High speed