FAW Jilin Automobile Xenia S80 Handbook Download Page 222

Page: 222 / 262

14-10

4. Use a spark plug wrench to unscrew the spark

plug.

("K3-VE3 and 3SZ-VE2/3 are taken as example

here)

5. Install the spark plug securely.

Warning

Do not excessively tighten the spark plug;

otherwise, the engine might be damaged.

6. Use a spark-plug tip clearance gauge to check

the electrode clearance of spark plug.

If necessary, bend the grounding electrode as

required to regulate the spark-plug tip clearance.

For recommended spark plugs, see Section 15.

Warning



Do not regulate the electrode clearances of

used spark plug; otherwise, engine might be

damaged.

Install the spark plug securely.

Warning

Do not excessively tighten the spark plug;

otherwise, the engine might be damaged.

8. Install the ignition coil.

Spark-plug tip clearance

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands