FAW Jilin Automobile Xenia S80 Handbook Download Page 38

Page: 38 / 262

3-4

Flap-seat backrest

Folding handle

1. Regulate the position of the front seat, and

prevent the backrest of second row contact the

front seat.

2. Pull forward the folding handle, incline the

backrest, and release the folding handle.

Handle

3. To retract the seat, pull up the folding handle,

and lift up the seat.

Set back the second-row seat

1. Lift up the seat backwards.

2. Lift up the backrest.

Danger

In order to reduce danger and personal injury in

case an accident takes place:
● Never allow anybody to seat inside the boot

compartment. The boot compartment is not

designed for passengers.

● The height of articles piled inside the boot

compartment shall not exceed that of the

backrest.

● Verify that the backrest second-row seat is set

back to its vertical position and securely locked

up, and the seat belts may be observed quite

clearly.

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands