FAW Jilin Automobile Xenia S80 Handbook Download Page 53

Page: 53 / 262

3-19

SRS (auxiliary restraint device) air
bag

● When the front of your automobile is subjected

to severe impaction and the transducer of SRS

air bag detects an impact force higher than the

setting value (sharp pounding capable of leading

to grievous injuries), the SRS air bag may be

immediately triggered off.

● The seat belt bind the bodies of the driver and

front-row passengers, and the SRS air bags and

the said function may function jointly so as to

reduce the impact force applied onto the cheeks,

heads, chests and other positions of the driver

and the passengers.

Air bag for the driver

Air bag for the front-row passenger

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands