FAW Jilin Automobile Xenia S80, Handbook

Page: 36 / 262

3-2
Backrest regulating handle
Regulate the angle of backrest
Bend forward slightly, and pull up the backrest
regulating handle. Incline the backrest gradually till
it reaches the desired angle.
Then release the backrest regulating handle.
Danger
● After the angle of backrest is regulated, allow
your body to apply a pressure onto the backrest
to verify that the backrest is securely locked up.
Doing so may prevent the unexpected
movement of backrest, such that you may not
lose control of your automobile.
● Never try to regulate the backrest of driver's seat
during driving. Doing so may cause
out-of-control of the automobile, resulting in an
accident.
● Do not incline the backrest excessively so as to
prevent the passenger from slide out of his seat
from beneath the seat belt in case a collision
takes place.
Headrest
Regulate the height
To raise the height of headrest, just pull it up
vertically.
To lower the height of the headrest, just push the
locking button and press down the headrest.
Regulate the center of the headrest such that it may
approach the centers of your ears to the maximum
extent.
Remove the headrest
To remove a headrest, just push the locking button
and pull up the headrest vertically.