FAW Jilin Automobile Xenia S80 Handbook Download Page 181

Page: 181 / 262

11-7

Spare tire

Remove/install a spare tire

1. Open the back door.

2. Use a hub wrench to unfasten the set bolts till

the spare tire bracket is loosened.

3. Lift up the spare tire bracket gently, and remove

it from the trip.

4. Store a spare tire in reverse order.

Danger

Ensure that the spare tire is securely fixed. If the

spare tire is installed unsteadily, it drop down

during driving and lead to an unexpected accident.

Attention



When you install a burst tire onto the spare tire

bracket, do verify that the wheel surface (index

surface) faces up.

Hub wrench

Summary of Contents for Xenia S80







































































































































































































































































Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands

FAW Jilin Automobile Xenia S80, Handbook

Search results

Summary of Contents for Xenia S80

Reviews:

Related manuals for Xenia S80

Brands by name

Popular brands