manualshive.com logo in svg

Extron electronics MLC 104 IP Plus Series, User Manual, Page: 68 / 174

Share
Download
Extron electronics MLC 104 IP Plus Series User Manual Download Page 68

MLC 104 IP Plus Series • Software-based Configuration and Control

60

User Mode

The first of the 

Control

 web pages, 

User

 Mode, is a representation of the MLC front 

panel buttons, volume control, and any optional control modules (IRCMs, CMs) that are part 
of the system. Clicking on a button on screen emulates a button press on the corresponding 
device. This page is accessible to both administrators and users.
From the factory, the MLC 104 IP Plus comes with a preloaded web page with a basic 
representation of the MLC front panel controls and the buttons of any optional attached 
control modules. See the following example.

Figure 26. 

Typical User Mode Embedded Web Page

Web pages that show a more  
lifelike representation of the MLC front panel 
and of control modules (as shown in 
figure 27 at right) are included with the 
configuration software. These pages (over 
200 files) can be uploaded into the MLC if 
you select 

Upload Enhanced Web 

Pages

 from the 

Advanced 

Configuration

 page in Global 

Configurator before you build the 
configuration and load it into the MLC.

Figure 27. 

Enhanced User Mode 
Embedded Web Page

Summary of Contents for MLC 104 IP Plus Series















































































































































































Reviews:

No comments