MLC 104 IP Plus Series • Reference Material
149
Mounting the MLC to an Electrical Box or Mud Ring
1.
With power disconnected at the source, insert the MLC into the wall or furniture.
2.
Mount the MLC to the wall box or mud ring mounting bracket with the provided
machine screws (mounting screws, as shown in the following illustrations).
NOTE:
For the installation to meet UL requirements and to comply with National
Electrical Code (NEC), the MLC must be installed in a UL Listed junction box. The
end user or installer must furnish the junction box; it is not included with the MLC.
4.06"
3.75"
OF
F
ON
OF
F
ON
CONFIG
DISPLA
Y
VOLUME
1
2
3
4
MLC 104 IP Plus
Wall Mouting
Bracket
Wall
Rotate locking arm
and insert into wall
opening.
Extron
MLC 104 IP Plus
Figure 40.
Mounting the MLC to a Mud Ring
Mounting the MLC to a Wall or Furniture
These instructions assume that the correct size of opening has been cut in the wall
or furniture. See the
starting on page 143. Take care in cutting
the opening so as not to damage the furniture. A licensed, bonded craftsperson is
recommended for that task.
1.
If you have an MLC 104 IP Plus Series model other than the MLC 104 IP Plus L, remove
the four faceplate attachment screws and remove the original faceplate, if applicable.
2.
If you have a model other than the MLC 104 IP Plus L, attach the optional lectern
mounting faceplate to the MLC with the screws removed in step 1.
3.
With power disconnected at the source, insert the MLC into the wall or furniture.
4.
Fasten the MLC and faceplate directly to the furniture or wall using wood screws.
2-gang
Wall Box
Wall
OF
F
ON
OF
F
ON
CONFIG
DISPLA
Y
VOLUME
1
2
3
4
Extron
MLC 104 IP Plus
MLC 104 IP Plus
Figure 41.
Mounting the MLC to an
Electrical Box
Summary of Contents for MLC 104 IP Plus Series
Page 6: ......