Extron electronics MLC 104 IP Plus Series User Manual Download Page 142

Page: 142 / 174

MLC 104 IP Plus Series • Special Applications

134

Volume Control Software Setup

To configure the MLC to work with the MLA volume controller, perform these steps:

Start the Global Configurator software and open a project that includes an
MLC 104 IP Plus Series unit.

In the

IP Link

tree view panel, click on the MLC to be configured (see image below).

Configure the MLS port with the correct driver.

Click

MLS Port

. The

MLS Port

tab displays in the right side of the window.

Click the

Disable MLS support (Enable serial driver support)

radio button. If the

Confirm MLS Port Change

window appears, click

Click the

Serial Configuration

tab.

Select the manufacturer (

Extron

, in the example below).

Locate and select (click on) the model name (

MLA VC10 Plus

) in the

Available

Drivers

area.

Click

Add Driver

. The name of the MLA VC10 Plus appears in the

Added Driver

field, and the commands available in its driver appear in the

GlobalViewer

area at the bottom of the window.

Configure the MLC front panel volume control knob to control the MLA VC10 Plus (see
image on next page).

Click the

Front Panel

tab.

Click the

Volume Up

button.

Summary of Contents for MLC 104 IP Plus Series















































































































































































Search results

Summary of Contents for MLC 104 IP Plus Series

Reviews:

Extron electronics MLC 104 IP Plus Series, User Manual, Page: 142 / 174

Search results

Summary of Contents for MLC 104 IP Plus Series

Reviews: