Extron electronics MLC 104 IP Plus Series, User Manual, Page: 164 / 174

MLC 104 IP Plus Series • Firmware Updates 156
6. Set the maximum number of firmware uploads that can take place at the same time.
The firmware files are uploaded to this many units at a time until all units listed in the
Select Device list have received new files. The default is 5 uploads at a time, and
the upper limit is the total number of units shown in the Select Device list (see
image below).
Figure 43. The Firmware Update Manager Window Prior to Uploading
7.
In the Select Device list, select the devices for the firmware update. The process is
identical for any IP Link-enabled product.
•
< Ctrl >-click on the name(s) of the unit(s) to select (or deselect) more than one unit
in the list.
•
Click on the name of one unit and < Shift >-click on the name of another unit to
select those two MLCs and the identical model MLCs listed between them.
8. Click Browse in the Select Firmware File panel , then locate and select the
firmware file you downloaded in step 1.
9.
Click Begin , then confirm that you want to start uploading the firmware. The software
displays the progress and status of the firmware upload for each unit, then performs
a firmware validation before finishing. If uploading fails, you can view the error log
by clicking on
View Log . If uploading is successful, the Status column indicates
success for each unit.
10. Click Close .
11. Close the IP Link File Manager software.