manualshive.com logo in svg

Extron electronics MLC 104 IP Plus Series, User Manual, Page: 118 / 174

Share
Download
Extron electronics MLC 104 IP Plus Series User Manual Download Page 118

MLC 104 IP Plus Series • Special Applications

110

Setting Up the Front Panel Button

This section describes a procedure for setting up monitoring of audio and video muting 
status on the MLC, the 

example

 introduced on page 108. You can tailor this procedure to 

other functions that you may want to set up. This example assumes that you performed the 
prerequisite setup steps. Ensure that the Global Configurator project is open and the MLC is 
selected within the project.

1. 

Click on the 

Front Panel

 tab.

2. 

Click the 

Input 4

 button.

3. 

If desired, type in text for the on-screen button label and the tool tip (text that appears 
when the mouse pointer hovers over that button).

4. 

In the 

Button Modes

 panel, select 

Toggle

. This changes sets the button from single 

switch mode to toggle mode, which allows you to configure the button for two sets of 
presses and releases instead of the default of one press and release.

5. 

In the 

Driver

 tab within the 

Button Operations

 panel, double-click the name of 

the projector. A list of available driver functions is displayed below the driver name.

6. 

Set the button press actions for projector AV mute.

a. 

Double-click 

Video Mute

.

b. 

Click 

On

.

c. 

Click the green arrow adjacent to the 

Release

 area or drag the command to the 

Release

 area.

NOTE:

  Extron recommends that you always assign monitored functions to the 

button release for best results.

d. 

For 

Toggle

, click 

1

 to associate the AV Mute On command with the first button 

release.

Summary of Contents for MLC 104 IP Plus Series















































































































































































Reviews:

No comments