MLC 104 IP Plus Series • Special Applications
114
22.
Scroll through the
Device
panel and click on
Input 4
in the
Front Panel
Buttons
group.
23.
Click
Button - Set Toggle Action #1
(which triggers the
Video Mute Off
command) in the
Action Commands
panel.
24.
Click the
Apply Action
button.
25.
Scroll through the
Devices
panel and click
Input 4
in the
Front Panel Buttons
group.
26.
Click
Lights - Off
in the
Action Commands
panel.
27.
Click the
Apply Action
button.
28.
Click
Done
. The
Monitored Conditions Wizard
window closes. The resulting
monitored conditions are shown in the following image.
29.
Complete the rest of the configuration as described in the
Global Configurator Help
file,
then save the project.
30.
Build and upload the configuration to the MLC.
Working with Combination Source Devices
Many combination DVD-VCR players can output the video signals from both the video tape
and the DVD parts on a single port. If you connect this single output to one input on a
switcher (or projector), the switcher has no way to automatically know whether it receives
input from the DVD or from the VCR. The switcher treats it as one input device and does not
switch between the two.
Available Methods
There are several ways to work around the single-input limitation to make both the DVD and
VCR media accessible to the switcher, including the following methods:
•
Using separate source output ports on the DVD-VCR player
•
Using a distribution amplifier with the switcher
•
Using separate IRCM control modules for DVD-VCR control
•
Using an IRCM-DV+ control module for DVD-VCR control
Summary of Contents for MLC 104 IP Plus Series
Page 6: ......