manualshive.com logo in svg

Extron electronics MLC 104 IP Plus Series, User Manual, Page: 52 / 174

Share
Download
Extron electronics MLC 104 IP Plus Series User Manual Download Page 52

MLC 104 IP Plus Series • Software-based Configuration and Control

44

Global Configurator Software for Windows

®

 

The included Extron Global Configurator (GC) program for Windows offers the most 
complete way to configure and customize the controller via either RS-232 or IP connection. 
GC provides the ability to generate a web browser-based GlobalViewer (GV) application 
and web pages for each IP Link-based device (MLC 104 IP Plus, IPL 250, IP Link interface, 
IPCP, System 5 IP, MLC 226 IP, or other Extron device) on a network. Once an MLC is 
configured, its GlobalViewer web pages allow the user to manage, monitor, and control the 
MLC and the devices connected to it.
Global Configurator offers the best and easiest way to configure the MLC. Other setup 
options include using SIS commands and the factory-embedded web pages, but many 
setup features are available only via Global Configurator. GC includes some functions 
found on the embedded web pages of the controller and many additional features that are 
available only through the software.

Downloading the Software and Getting Started

Global Configurator software updates and a large variety of device drivers can be downloaded 
at no charge from the Extron website (

www.extron.com

). When you locate the desired 

software or driver package, follow the on-screen directions to download and install it.

NOTE:

  Ethernet, serial, and infrared (IR) device drivers (for controlling projectors, VCRs, 

DVD players, and so forth) are available on the Extron website:

• 

As individual device driver files

• 

As an IP Link driver package

If an IR driver does not already exist for an IR-controlled device in your system, you 
can download the optional IR Learner. It is a free software utility that makes it possible 
to capture infrared codes from a handheld IR remote control and create custom 
drivers for operating the corresponding IR-controlled device.

NOTE:

 

Do not

 change the directory or the name of the directory where the software 

files are installed by default.

Read the 

Global Configurator Help

 file for details and step-by-step procedures on how 

to start a GC project and perform basic setup tasks for an MLC. The help file contains 
instructions on how to set the 

IP address, gateway IP address, subnet mask, mail 

server IP address, domain name, Telnet port, web port, SMTP username

, and 

SMTP password

 so that the MLC is able to communicate with the network. Obtain this 

information from your network administrator and set the IP address before continuing.

PC System Requirements

See page 

6

 in the “Introduction” section for a list of the minimum hardware and software 

requirements.

NOTE:

  The MLC 104 IP Plus Series requires GC version 2.2 or higher.

Summary of Contents for MLC 104 IP Plus Series















































































































































































Reviews:

No comments