Extron electronics MLC 104 IP Plus Series, User Manual, Page: 103 / 174

MLC 104 IP Plus Series • SIS
™
Pr
ogramming and Contr
ol
95
Command/Response Table for SIS Commands (continued)
Command ASCII (Telnet)
(host to MLC)
URL Encoded (web)
(host to MLC)
Response
(MLC to host)
Additional Description
Set e-mail server IP address and user domain name
24
X1$
= IP address ( xxx.xxx.xxx.xxx ).
Leading zeros are optional in setting values;
they are suppressed in returned values.
X1%
= E-mail domain name; extron.com ,
for example
X7#
= An e-mail account username (for
SMTP authentication) of up to 31 characters.
This parameter is
optional during setup.
X7$
= An e-mail account password (for
SMTP authentication) of up to 31 characters.
This parameter is
optional during setup. In
a response, instead of the actual password,
X7$
is displayed as 4 asterisks ( **** ) if a
password has been set up or as nothing ( )
if it has not.
E X1$
,
X1%
,
X7#
,
X7$
CM
}
W
X1$
%2C
X1%
%2C
X7#
%2C
X7$
CM
|
Ipm •
X1$
,
X1%
,
X7#
,
X7$]
NOTES: • The variables
X7#
and
X7$
are optional for this command.
However, if you use them, you must use both variables together.
• Do not use commas in the names or passwords.
Example:
E
10.1.5.49,extron.com,JaneQInstaller,s3cretK3y CM
}
W 10.1.5.49%2C extron.com%2C JaneQInstaller%2C s3cretK3y CM
|
Ipm • 10.1.5.49,extron.com,JaneQInstaller,****
]
Read e-mail server IP address and user domain name
E
CM
}
W CM
| X1$
,
X1% X7#
,
X7$]