manualshive.com logo in svg

Extron electronics MLC 104 IP Plus Series, User Manual, Page: 128 / 174

Share
Download
Extron electronics MLC 104 IP Plus Series User Manual Download Page 128

MLC 104 IP Plus Series • Special Applications

120

Scheduling Front Panel Lockout Periods

For additional security you can set up an automated schedule to either completely prevent 
front panel changes or to restrict who can make front panel selections and adjustments 
during certain hours and days. For basic instructions on how to schedule front panel lockout 
periods, see 

Front Panel Security Lockout (Executive Mode)

 starting on page 13 and 

see 

Preparing the MLC for Front Panel Lockout

 starting on page 15. See the 

Global 

Configurator Help

 file for detailed steps on using the software to set up a scheduled action 

for a lockout period.

Sending E-mail by Pressing a Button

For some installations, you may want to set up an MLC button to send an e-mail 
requesting projector repairs or requesting assistance from the front office or the security or 
maintenance departments. Follow these steps to set up a monitor to track a button press 
and send an e-mail as the action.

NOTE:

  This application requires Global Configurator version 2.2.1 or higher.

1. 

Connect cables between the MLC, input/output devices, and the PC as described in 
the 

Operation, Features, and Cabling

 section starting on page 7.

2. 

Install and start the Global Configurator software version 2.2.1 or higher, create or 
open a GC project, and add an MLC to the project. For instructions, see the 

Global 

Configurator Help

 file.

3. 

In the 

IP Link

 tree view window, click on the 

MLC

 to be configured (see image below).

4. 

Click the 

Front Panel

 tab.

5. 

Configure the front panel button.

a. 

In the 

Front Panel

 area, click the button that triggers the e-mail. For this 

example, use 

input button

 

3

.

b. 

Type in text for the on-screen button label and the tool tip (text that appears when 
the mouse pointer hovers over that button).

c. 

Select the 

Single Switch

 button mode.

Summary of Contents for MLC 104 IP Plus Series















































































































































































Reviews:

No comments