manualshive.com logo in svg

Extron electronics MLC 104 IP Plus Series, User Manual, Page: 63 / 174

Share
Download
Extron electronics MLC 104 IP Plus Series User Manual Download Page 63

MLC 104 IP Plus Series • Software-based Configuration and Control

55

Configuration

There are four Configuration web pages, which only administrators can access: 

• 

System Settings

• 

Passwords

• 

Email Alerts

• 

Firmware Upgrade

System Settings

This page is for IP, date/time, and executive mode (front panel lockout) setting changes.

Figure 20. 

 System Settings Embedded Web Page

NOTE:

  Unit Name is any name (such as Room108MLC104IPplus, Lab1234mlc104 IP, 

ConfRoomSystem, LectureHall8-cntrlr) that you use to label this specific MLC.  
The default is a combination of the product name and part of the hardware address. 
The unit name can be changed to one of your choice using up to 24 alphanumeric 
characters and hyphens (-). See 

Using Global Configurator: Helpful Tips

 on page 

45 for examples.

• 

Spaces (  ) and underscores (_) are not permitted within the name of an MLC.

• 

Valid characters are Ato Z, a to z, 0 to 9, and - (hyphen).

• 

The name cannot start with a number or hyphen. It cannot end with a hyphen.

Summary of Contents for MLC 104 IP Plus Series















































































































































































Reviews:

No comments