Extron electronics MLC 104 IP Plus Series, User Manual, Page: 38 / 174

MLC 104 IP Plus Series • Operation, Features, and Cabling 30
Top Panel: IR Learning Sensor
In most cases, Extron has produced an IR driver
for controlling the projector or display you plan
to use. If a device driver file is not available,
you can create your own using Extron IR
Learner software, the remote control of the
projector or display, and the IR learning
receiver sensor on the MLC, shown at right.
See the
IR Learner Help file for instructions on
how to create the driver file. When capturing an IR command,
hold the projector remote control between 2” and 12” from and
pointed directly at the IR learning sensor on the MLC.
NOTE:
The MLC 104 Plus requires IR Learner
version 1.23 or higher.
Left Side Panel: Reset Features
Reset button and LED — Pressing this recessed button
causes various IP functions and Ethernet connection
settings to be reset to the factory defaults. The green
LED flashes depending on the selected reset mode
(see
Resetting the Unit , page 31 for details).
IR
Top Panel
IR Learning
Receiver
Top Panel
IR Learning
Angle and
Distance
1 2 3
4 5 6
7 8
0
9
2"–12"
(4–30 cm)
RESET
Left Side
Reset Button
(recessed)
Reset LED