Extron electronics MLC 104 IP Plus Series, User Manual, Page: 134 / 174

MLC 104 IP Plus Series • Special Applications 126
iii. Click Add .
iv. Click OK to save the contact and return to the Monitored Conditions
Wizard window.
k. Click on the desired alert e-mail
and on the name of the contact to
whom the e-mail is be sent, as
shown at right, then click
Apply
Email/Contacts .
l. Click Done .
m. Set up the second monitored
condition by following steps
2a - 2l but typing in the name
of the second condition
name (
Administrative
office alert ), selecting
Digital I/O 2 as the device,
and selecting a different e-mail and
contact in the
Email Manager .
The monitored conditions are summarized
in the
Monitored Conditions panel, as shown at
right.
3. Save the configuration, then build and upload it to the
MLC.
4. Cable the digital input ports on the MLC to the appropriate pins of the button panel or
switch, as shown in the following diagram.