manualshive.com logo in svg

Extron electronics MLC 104 IP Plus Series, User Manual, Page: 66 / 174

Share
Download
Extron electronics MLC 104 IP Plus Series User Manual Download Page 66

MLC 104 IP Plus Series • Software-based Configuration and Control

58

File Management

This web page allows you to sort by file type (see the 

Filter by File Extension

 

drop-down box). Personnel with administrator access can view these pages and make 
changes. Those with user-level privileges are not able to see this page. For an explanation of 
file types see 

File Types: a Key to Extron-specific File Names

 on page 142.

Figure 24. 

Typical File Management Page with Filtering by File Extension

ATTENTION:

 

• 

Files with the .cdc extension (

___.cdc

 files) should NOT be deleted.

• 

Les fichiers contenant l’extension .cdc (fichiers __.cdc) NE doivent PAS être 
supprimés.

ATTENTION:

 

• 

Potential for product malfunction.

 Event files (

__.evt

) should NOT be 

deleted. They are necessary for the operation of the controller. 

Never

 delete the 

main event file (

0.evt

).

• 

Possibilité de dysfonctionnement du produit.

 Les fichiers Événement (__.

evt) NE doivent PAS être supprimés. Ils sont nécessaires au fonctionnement du 
contrôleur.  Ne jamais supprimer le fichier Événement principal (0.evt).

You can also view files in subfolders, including those containing GlobalViewer files or 
IP Intercom files if they have been installed on the MLC. The following screen view shows an 
example of the file management page for subfolders.

Summary of Contents for MLC 104 IP Plus Series















































































































































































Reviews:

No comments