manualshive.com logo in svg

Extron electronics MLC 104 IP Plus Series, User Manual, Page: 161 / 174

Share
Download
Extron electronics MLC 104 IP Plus Series User Manual Download Page 161

MLC 104 IP Plus Series • Firmware Updates

153

NOTE:

  If GlobalViewer is installed in the MLC, the GlobalViewer web pages appear 

by default.

• 

GlobalViewer web pages are supported by Internet Explorer, but not by other 
browsers. GlobalViewer features may not work properly when viewed via 
Navigator, Mozilla

®

 Firefox

®

, Google Chrome

™

, or other browser programs.

• 

To reach the factory default web pages on a 
controller that has been set up for GlobalViewer, type 

http://

<IP address>

/nortxe_index.html

 

into the address area of the 

browser, substituting the actual IP address of the MLC for “

<IP address>

”. 

For example, 

http://192.168.10.10/nortxe_index.html

.

4. 

In the factory default web  
pages: 

• 

Select the 

Status

 tab 

and the 

System Status

 

page. The firmware 
version is listed in the 

System Description

 

panel, as shown at right.

Or

• 

Select the 

System Settings

 page within the 

Configuration

 tab. The 

firmware version is listed in the IP Settings panel, as shown below.

Summary of Contents for MLC 104 IP Plus Series















































































































































































Reviews:

No comments