manualshive.com logo in svg

EXFO IQS-8120NGE, User Manual

The EXFO IQS-8120NGE is a cutting-edge network testing solution that ensures optimal performance. Users can easily access the comprehensive User Manual for this product for free download from our website. This manual provides detailed instructions and troubleshooting tips to maximize the efficiency of the EXFO IQS-8120NGE.

Share
Download
background image

Index

524

IQS-8500 Series and IQS-8120NGE/8130NGE

Remote Control......................................... 390
Remote Fault..................... 159, 162, 165, 195
Remote IP Address .................................... 354
Remote Module........................................... 71
remote status .............................................. 47
Remote to Local 306, 307, 308, 311, 314, 315, 

316, 318, 319, 320, 321, 428, 430,
432, 434

removing a module ....................................... 9
replied from ...................................... 400, 404
Report ......................................................... 45
Report Format ............................................. 51
Report Header ............................................. 51
report settings............................................. 51
Report Title.................................................. 51
request...................................................... 409
reserved bit ............................................... 503
Reset ........................................................... 45
Reset to Default button............................. 237
reset to display default pages layout......... 369
Resolve MAC Address. 78, 221, 226, 486, 491, 

498

Restore Default ......................................... 496
return merchandise authorization (RMA) .. 452
RFC 2544....................................... 80, 89, 124

Status .................................................. 124

RFC 2544 Errors................................. 166, 196
RFC 2544 tabs ................................... 299, 325
Round Trip Delay....................................... 198

Average ............................................... 198
Last...................................................... 198
Maximum ............................................ 198
Minimum............................................. 198
Samples ............................................... 198
Unit ..................................................... 198

Round Trip Latency.................................... 352
Round Trip Time (ms) ................................ 358
run .................................................... 396, 401
runt ........................................................... 166
RX ............................. 307, 311, 315, 320, 385
RX Bandwidth ........................................... 199
RX Bytes .................................................... 199

RX Frames.................................................. 199
RX Rate...................................................... 351
RX Throughput .......................................... 173

Bandwidth ........................................... 173
Frame Rate........................................... 173
Utilization ............................................ 173

RX_ID......................................................... 237

S

S_ID ........................................................... 234
S1 .............................................................. 251
safety

caution .................................................... 3
conventions ............................................. 3
laser ......................................................... 5
warning ................................................... 3

Save..................................................... 46, 393
Scan Subnet ................................................ 87
script ........................................................... 67
script line editing....................................... 395
script tools................................................. 394
SDT............................................................ 359
Seconds ....................................................... 55
section overhead ....................................... 251
Sections Tab ................................................ 53
SEF .................................................... 244, 248
Select All............................ 265, 271, 273, 277
Select Range...................... 265, 271, 273, 277
selected ENIU ............................................ 408
selected logo ............................................... 51
Selection Options .............................. 265, 277
Send .................................... 46, 193, 194, 245
SEQ_CNT ................................................... 237
SEQ_ID....................................................... 237
sequence tag ............................................. 204
serial number ............................................ 378
Service ....................................................... 326
service and repairs..................................... 452
service centers ........................................... 453
Service Configuration Test .... 74, 85, 327, 329, 

347

Summary of Contents for IQS-8120NGE



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IQS-8120NGE

Qingdao H.Y AP300 Manual preview
AP300
Brand: Qingdao H.Y Pages: 6
ZOLL R Series In-Service Manual preview
R Series
Brand: ZOLL Pages: 5
Accu-Chek Compact Pocket User Manual preview
Compact
Brand: Accu-Chek Pages: 3
iBin Compact Installation Instructions preview
Compact
Brand: iBin Pages: 2
IDEAL Networks NaviTEK NT Quick Reference Manual preview
NaviTEK NT
Brand: IDEAL Networks Pages: 10
Raven RS1 Guidance And Steering Installation Manual preview
RS1
Brand: Raven Pages: 48
Pacific Solana Assembly Instructions Manual preview
Solana
Brand: Pacific Pages: 16
Tactile Medical AFFLOVEST Instructions For Use Manual preview
AFFLOVEST
Brand: Tactile Medical Pages: 23
Taarup 7640 Operator'S Manual preview
7640
Brand: Taarup Pages: 72
Teac BB-1000CD Release Notes preview
BB-1000CD
Brand: Teac Pages: 2
FoodMarble 000AA01 Getting Started preview
000AA01
Brand: FoodMarble Pages: 44
ISA DRTS.3 PLUS Manual preview
DRTS.3 PLUS
Brand: ISA Pages: 24
Torque 5456801-B Assembly Manual preview
5456801-B
Brand: Torque Pages: 10
Qtx Derby9 Manual preview
Derby9
Brand: Qtx Pages: 6
Hussmann KH14 Installation Manual preview
KH14
Brand: Hussmann Pages: 20
Waldbeck 10034733 Manual preview
10034733
Brand: Waldbeck Pages: 32
Geovent Magnetic Rail System Premium Instruction Manual preview
Magnetic Rail System Premium
Brand: Geovent Pages: 12
Techni-Lux DL-FLEXILED100W/B Manual preview
DL-FLEXILED100W/B
Brand: Techni-Lux Pages: 12

Brands by name

Popular brands

Load more brands